Twin Star DFH-CH-11-T Manual De Operación página 6

OPERATION INSTRUCTIONS
WARNING: Do not operate the product until fully assembled (including Casters).
1. Place the product upright on a flat, level, stable, heat-resistant surface, and then
uncoil the Power Cord, removing it completely from the Cord Storage Spool.The
power indicator will illuminate after plugged.
WARNING: Operate the product in an upright position only.
2. Turn the Thermostat Control Knob clockwise to its maximum range (Figure B).
3. Main Control Knob: Use this knob to set the heat setting (Figure B):
"I" – Low Heat Setting (600 Watts)
"II" – Medium Heat Setting (900 Watts)
"III" - High Heat Setting (1500 Watts)
4. When the desired ambient temperature is reached, slowly turn the Thermostat Knob
back toward MIN until it clicks. The product will cycle on and off to maintain that
setting.
NOTE: The product may emit an odor during first use; this is normal. Ventilate the
area as needed.
5. Turn off the product by rotating the Main Control Knob to the "O" position, and
then unplug the product from the electrical outlet.
WARNING: Always unplug the product when it will be left unattended or not in use.
E-6