BasicOperation; SwitchingTheUnitOnOrOff; ReleasingTheFaceplate; SoundAdjustmentMode - Jensen MP1514BT Manual Del Propietário

BASICOPERATION

SwitchingtheUnitOnorOff

Press the /MUTE button to turn the unit on. The button illuminates.
When unit is on, press and hold the

ReleasingtheFaceplate

Press the (Release) button to detach the removable faceplate.

SoundAdjustmentMode

The sound adjustment mode allows you to easily adjust your mobile audio system
to meet the acoustical characteristics of your vehicle.
ToAdjusttheSound:
1. Press the volume knob briefly to enter the sound adjustment mode. "VOL"
appears in the display panel.
2. Press the volume knob briefly again until the setting you want to change
appears in the display panel. The settings will change in the following order:
VOL
(Volume)
3. Rotate the volume knob clockwise or counter-clockwise to adjust the setting.
The display panel will return to the normal indication in 5 seconds and the
new settings are saved.
Settings:
• VOL - Reduces or increases the volume.
• BAS - Reduces or increases the bass frequency sound level.
• TRB - Reduces or increases the high frequency sound level.
• BAL - Balances the audio output levels between the left and right side of the
vehicle.
• FAD - Balances the audio output levels between the front and back side of the
vehicle.
• LOUD - Automatically alters the frequency response curve of audio to make it
sound more natural when played at a lower volume level.
24
BAS TRB
(Bass) (Treble)
/MUTE button to turn the unit off.
BAL FAD
(Balance) (Fader)
LOUD
(Loudness)