FactoryResetFunction - Jensen MP1514BT Manual Del Propietário

FactoryResetFunction

The factory reset function restores the unit to its factory default settings. Reset the
system for the following reasons:
• Initial installation of the unit when all wiring is completed.
• All the function buttons do not operate.
• Error symbol on the display panel.
ToResettheSystem:
Remove the front panel to access the RESET button.
1.
2. Use the tip of a ballpoint pen or sharp metal object to press the RESET button.
The factory default settings are restored.
Note: If you press the reset button, and the unit still does not operate, please use a
cotton swab soaked in isopropyl alcohol to clean the multi-pin connector on
the front panel.
28