STEP 2B Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
●
Mount wall plate
directly onto concrete surface (no wall covering)
07
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
●
Minimum horizontal space between fasteners: 16 in. (406 mm)
1
Min.
16 in. (406 mm)
NOTE: During operation, your TV
shifts 2.28 in. (58 mm) when retracted
or extended. The wall plate and TV
brackets have built-in adjustments to
help fine-tune your TV placement.
3
C1
Be sure the anchors C1
CAUTION:
are seated flush with the concrete surface.
Solid Concrete or Concrete Block Installation
06
RETRACTED
EXTENDED
2.28 in. (58 mm)
Concrete Install Kit #CMK1 is not included
(see page 4) Contact Customer Service
at 1-888-333-9952 to inquire about the
additional hardware.
2
3 in. (75 mm)
3/8 in.
(10 mm)
CAUTION:
Never drill into the mortar between blocks.
4
002862.eps
using four lag bolts C3 and washers C2 .
Install the wall plate
07
TIP: Use the slotted holes for fine-tuning your placement.
Tighten all lag bolts only until they are pulled firmly against the wall plate.
CAUTION:
Improper use could reduce the holding power of the
lag bolt. DO NOT over-tighten the lag bolts C3 .
06
07
C2
C3
Go to STEP 3 on PAGE 9.
7