WISEUPSHOP PBC300 Guia Del Usuario página 2

SDHC Class 10 Micro SD card is recommended. If no Micro SD card is fitted into the
camera, the red and blue indicator lights will flash 10 times and turn off. The camera
will shut down automatically. If the Micro SD card cannot be read, the camera will not
respond to your operation.
3.1. POWER ON/OFF
3.1.1. Power on the camera by pressing the Power Button for 2 seconds. The red
indicator light will stay illuminated, indicating the camera has entered into standby
mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 3 seconds. The red
indicator light will turn off.
[Note]:
The camera will shut down automatically if it is in standby mode without any operation more
than 1 minute.
3.2. VIDEO RECORDING
3.2.1. Power on the camera by pressing the Power Button for 2 seconds. The red
indicator light will stay illuminated, indicating the camera has entered into standby
mode automatically.
3.2.2. Press the Power Button once to record video. The red indicator light will flash
3 times and then turn off.
3.2.3. Press the Power Button once again to stop recording video. The red indicator
light will stay illuminated, indicating the camera is back to standby mode.
[Notes]:
1). A video file will be generated and saved every 5 minutes automatically.
2). The camera can record video for 17 hours continuously on a full charge.
3). Video Resolution: 1920×1080P Video Format: MOV
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Power on the camera by pressing the Power Button for 2 seconds. The red
indicator light will stay illuminated, indicating the camera has entered into standby
mode automatically.
3.3.2. Press the Camera Button once to take a photo. The blue indicator light will
flash once and turn off.
3.4. MICRO SD CARD FORMATTING
3.4.1. Power on the camera by pressing the Power Button for 2 seconds. The red