WISEUPSHOP PBC300 Guia Del Usuario página 3

indicator light will stay illuminated, indicating the camera has entered into standby
mode.
3.4.2. Press the Camera Button for 2 seconds. The red and blue indicator lights will
flash 5 times and turn off, indicating the SD card formatting has been completed; the
red one will stay illuminated, indicating the camera is back to standby mode.
3.5. RESETTING
If, for any reason, the camera stops working or isn't working properly, a reset will
restore it back to normal operation.
Operation: Use a pin to press the Reset Button once to reset all settings to factory
default. The camera will shut down automatically. Restart the camera with the de-
fault settings.
IV. Video/Image Files Uploads
4.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
4.2. Insert the card reader into a PC computer.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the "DCIM" folder.
V. Setting Time/Date Stamp
5.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
5.2. Insert the card reader into a PC computer.
5.3. Removable disk drive folder appears.
5.4. Click on the drive in the root directory and inside the root directory, create a file
named "TIMERSET.TXT".
5.5. Write the current date and time in the "TIMERSET.TXT" file with the correct
format:
YYYYMMDDHHMMSS Y. (For example: 20160412142432 Y). Save this file. If you
don't need stamp on your video or image files, change "Y" into "N" in the "TIM-
ERSET.TXT" file.
5.6. Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1. Connect the camera to an outlet AC power socket by using the USB cable and
DC 5V charging adapter provided.
6.2. It will take 12 hours to obtain a full charge.