General Standards - AERMEC TDA Manual De Instalación, Uso Y Mantenimento

General standards

The present manual is an
integral part of the docu-
mentation enclosed with the
machine.
It must be conserved for
future reference and must accompany
the machine throughout its working life.
The manual defines the purpose for which
the machine was built and establishes the
correct installation and use limits.
• All use, installation and maintenance
instructions of the unit are described
in this manual as well as the main
accident prevention standards.
• Read carefully and fully all informa-
tion contained in this manual before
the installation, start-up, use, main-
tenance and cleaning of the unit. Pay
particular attention to the use regu-
lations accompanied by the words
"DANGER" or "WARNING": failure to
observe them could cause damage to
the machine and/or persons and pro-
perty.
• For irregularities not contemplated by
this manual, consult the local After
Sales Service.
• S.p.A. decline any responsibility for
any damage due to the improper use
of the machine, and to a partial or
superficial reading of the information
contained in this manual.
• Installation and maintenance must be
carried out by trained and qualified
personnel, having the requirements
laid down by law 46/90 and/or DPR
380/2001 for electric/electronic and
air conditioning installations, with
consequent registration at the local
CHAMBER of COMMERCE. Otherwise
Aermec S.p.A. decline all responsibility
regarding the safety of the product.
THE MANUFACTURER DECLINES ANY
R E S P O N S I B I L I T Y F O R D A M A G E TO
PROPERTY, PERSONS OR ANIMALS CAUSED
BY THE NON-OBSERVANCE OF THE
Selection, installation, use and maintenance manual
INDICATIONS AND REGULATIONS CONTAINED
IN THIS MANUAL.
Even though a suitable risk analysis was
carried out during the design of the TDA
unit, pay ATTENTION to the pictograms
on the machine; these make it easier to
read the manual, drawing the reader's
attention to risks that cannot be avoided
or sufficiently limited with the adoption
of protection means and measures.
GENERAL DANGER SIGNS
Carefully observe all indications
at the side of the pictogram.
The non observance of the indi-
cations could cause hazardous conditions
with possible injury to the operator and to
the user in general.
VOLTAGE DANGER SIGN
Carefully observe all indications
at the side of the pictogram.
The signs indicate components of
the unit or, in the present manual, iden-
tify areas that could generate risks of an
electrical nature.
GENERAL WARNING SIGNS
Carefully observe all indications
to the side of the pictogram that
limit some actions in order to ensure grea-
ter safety for the operator.
5
Air conditioning unit -
M A I N G U A R A N T E E
CONDITIONS
• The guarantee does not include pay-
ment for damages due to incorrect
installation by the installer.
• The guarantee does not include pay-
ment for damages due to the improper
use of the unit by the user.
• The manufacture is not responsible for
injuries to the installer or user, caused
by incorrect installation or improper
use of the unit;
• The equipment must be installed in
such a manner so as to permit mainte-
nance and/or repair operations;
• The guarantee does not cover in any
case costs due to turntable ladders,
scaffolding or other similar elevating
systems that are necessary to carry
out operations under guarantee.
The guarantee is not valid if:
• the services and repairs have been
carried out by unauthorised personnel
or companies;
• the unit has been previously repaired
or modified with non-original parts;
• the unit has not been suitably maintai-
ned;
• the instructions given in this manual
have not been observed;
• unauthorised modifications have been
made.
Note:
the manufacturer reserves the right to
carry out modifications at any time dee-
med necessary to improve its product, and
is not obliged to apply the said modifica-
tions to previously manufactured machi-
nes that have already been delivered or
are being constructed.
The general conditions are in any case
subject to the general sale conditions
foreseen on the stipulation of the con-
tract.
TDA range