Driving Motorcycle - Serpento PREDATOR Manual De Usuario

Note:
(1) Please loose button immediately within 3~5 seconds when using electric starting button, otherwise the battery life would be influenced,
because it is discharged too fast.
(2) When engine is started, please release the electric starting button immediately. When engine is working, the operation of electric starting
button is not allowed, otherwise engine would be broken easily.
(3) If engine can not be started within three times, please use foot starting, so that avoiding the power of battery is broken too much to short
the life .
(4) When using foot staring, please don't step up starting rod powerful to avoiding hunt your foot or break parts.
(5) For electric and foot staring engine, it can not use together.
(6) After cool starting, make sure warm up engine , and do not drive on road directly .
(7) Please accelerate stability after starting (turning the throttle handle grip).

Driving Motorcycle

Operation of changing gearshift
(1) When engine is idling, pull in the clutch lever to disengage the clutch and step up gearshift arm to shift into 1st gear.
(2) Slowly release the clutch lever to engage the clutch and at the same time gradually increase engine speed to ensure a smooth start
motorcycle.
(3) When the motorcycle attains a steady speed, and then slowly reduce the engine speed, and getting out of clutch ,and shift to 2nd gear .and
then increase the engine speed, and at the same time release clutch lever slowly to ensure a smooth start motorcycle.
(4) Deceleration before shift into low gear. Please increase engine speed before you shift into low gear to avoiding the transmission parts and
rear wheel is broken.
(5) Repeat the above operation to shift into the high gear and the low gear.
22