Operation , Check & Adjustment Of The Throttle; Adjusting The Clutch - Serpento PREDATOR Manual De Usuario

32
carburetor, intake valve. If the leakage exists, you should maintain or replace the relevant parts so as to prevent the exhaust gas coming into
the atmosphere directly.
Operation , check & adjustment of the Throttle
Check of throttle
Adjustment of free way of throttle bar
The free way of throttle bar is 2mm-6mm.
Up - nut can be adjusted a little, low – nut (at joint of carburetor) can be adjusted some
If need adjust, firstly loose the bolt on up-adjustable nut, then turn up-nut to adjust
If need adjust much, please loose tight nut on throttle cable, adjust free way to 2mm- 6mm
If throttle cable is settled on wrong way, please re-settle
If throttle cable is broken, choke, or on the wrong way, please renew a new cable

Adjusting the clutch

Clutch is to transfer the power from engine to transmission, cut off power if necessary to, user should
grip all of clutch or fully loose it . If not, it is easy to damage the clutch. User can lubricate the clutch
cable to avoid abrasion and rot early.
Free way of clutch bar is 10 mm – 20 mm,. If adjust a little, firstly loose
Tight nut, turn adjustable bolt . If adjust much, please loose the tight nut on plate of clutch on crankcase and adjust.
After adjust clutch , grip clutch bar , start engine and change gear ,make sure engine not stop , motorcycle not move slow, release clutch bar
gradually and increase accelerograph , motorcycle can be stably move and accelerate.
If user can not adjust or clutch can not work correctly, please ask help from our dealer.