LanParty NFII ULTRA Manual Del Usuario página 48

2
English
2.3.11 WinFlash
WinFlash is a utility program that allows you to flash the BIOS
under an operating system.
To install, please follow the steps below.
1. On the left side of the autorun screen, click the "TOOLS"
icon.
2. Click "WinFlash" on the main menu.
3. Follow the prompts on the screen to complete installation.
4. Restart the system.
To flash the BIOS, run the WinFlash utility.
2.3.12 6-Channel Audio Output via Software
The line-out jack (at the rear panel) together with the 4-channel
audio connector supports 6-channel audio output. If, for any rea-
son, you are not using the 4-channel audio connector which is
made possible by connecting a 4-channel audio cable, the 6-chan-
nel audio output function can be suppor ted using software.
Please follow the steps below.
1. On the left side of the autorun screen, click the "AUDIO"
icon.
2. Click "Audio Drivers" on the main menu.
3. After installing the audio driver, the "SoundEffect" icon will ap-
pear on the taskbar.
4. Click the "SoundEffect" icon. The "AC97 Audio Configuration"
screen will appear.
5. Click the "Speaker Configuration" tab, then select "6 channels
mode for 5.1 speakers output".
6. Click the "Sound Effect" tab, then under "Environment", select
the sound effect you want. You must select one to create 6-
channel audio output.
48