Hard Drive; Parallel Port - LanParty NFII ULTRA Manual Del Usuario

2
English

Hard Drive

Hard disk failure.
1. Make sure the correct drive type for the hard disk drive has
been entered in the BIOS.
2. If the system is configured with two hard drives, make sure
the bootable (first) hard drive is configured as Master and the
second hard drive is configured as Slave. The master hard
drive must have an active/bootable partition.
Excessively long formatting period.
1. If your hard drive takes an excessively long period of time to
format, it is likely a cable connection problem. However, if
your hard drive has a large capacity, it will take a longer time
to format.

Parallel Port

The parallel printer doesn't respond when you try to print.
1. Make sure that your printer is turned on and that the printer
is on-line.
2. Make sure your software is configured for the right type of
printer attached.
3. Verify that the onboard LPT port's I/O address and IRQ set-
tings are configured correctly.
4. Verify that the attached device works by attaching it to a par-
allel port that is working and configured correctly. If it works,
the printer can be assumed to be in good condition. If the
printer remains inoperative, replace the printer cable and try
again.
52