Festo CPX-GP Serie Manual Del Usuario página 14

Overview of fitting elements for Midi/Maxi pneumatics:
4 6 5
1 Pneumatic interface (connection
to manifold sub-bases of the CPX
terminal with tie rods)
2 Sub-bases of the Midi/Maxi
pneumatics with valves (see
pneumatics manual)
With wall fittings: If necessary, glue two spacers (supplied)
onto the pneumatic interface and the left-hand end plate
to compensate for the difference in height.
With hat rail fittings: If necessary, remove the spacers
which are glued on.
14
1
2
3
4
3 M4 x 14 screws
4 Spacers
5 Electrical plug
connection
6 Seal
Festo CPX-GP-... 0201NH English