PRIOR TO OPERATION
20cm
- Place the dehumidifi er in an upright position on a stable, fl at surface.
- Ensure the dehumidifi er is at a safe distance at least 50cm away from a wall or furniture.
- Supply power should be in correspondence with the value on the nameplate, power outlet needs to be
grounded.
- Ensure the tank is correctly fi tted, if the tank is full or not in place, the tank full light comes on and the
dehumidifi er will stop working.
- Turn on the power and run the machine as per instructions below.
CONTINUOUS DRAINAGE
In general, water will be collected by tank, if you want continuous drainage, please do steps as follows (refer
to fi gure 3)
1- Remove the water tank.
2- Insert the drainage pipe with 14mm inner diameter through the drainage outlet.
3- Place the water tank back to the unit.
Please always make sure the pipe is going downhill, and is not blocked or kinked.
www.glaziar.com / info@glaziar.com
25