Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION, START-UP AND CONFIGURATION
1
INITIAL REQUIREMENTS
Minimum hardware requirements (PC)
• Processor: Intel® Pentium® III or equivalent
• Memory: 256 MB RAM
• Hard drive
• USB Port
Software requirements
• Microsoft® Windows® operating system: Windows
2000, Windows XP, Windows Vista (32 bits),
Windows 7 (32 and 64 bits) or Windows 8 (32 and
64 bits) installed on the computer.
2
CONSOLE CONNECTION
Programming console elements
1
RS-232 connector
2
Console power connector
3
Transmitter programming connector
4
Key-tag receiver circle
5
Slot A DATA memory card
6
Slot B COPY memory card
Fig. 2
Console connection
1 Connect the console to the PC. To do this, connect
the communication cable (7) to the PC's USB port
(10) and to the console's serial connector (1).
30
Installation and Use Manual
• Microsoft NetFrame 2.0 Libraries (versions other
than 2.0 may cause performance problems), which
can be downloaded from the Microsoft website.
ERREKA shall not be liable for the incorrect operation of
the application when using later versions of NetFrame.
Microsoft, Windows, Windows 2000, Windows XP,
Windows Vista, Windows 7 and Windows 8 are
trademarks or registered trademarks of Microsoft
Corporation in the U.S. and other countries. Intel
and Pentium are trademarks of Intel Corporation in
the U.S. and other countries.
Components supplied
7
PC-console communication cable
8
Power supply cable
9
Transmitter programming cable
Components NOT SUPPLIED
10 PC with USB port
11 Transmitter
12 Key-tag
13 Memory
2 Connect the console to the power supply using the
power cable supplied (8).
I251C
Publicidad
Capítulos
Tabla de contenido
