Erreka IRTAGPROG Manual Del Instalador página 42

WORKING WITH THE DATABASE
Define transmitter codes (reserve entries for transmitters)
38
Installation and Use Manual

The "Reserve entries" function is used to define the
codes which will subsequently be recorded in the
transmitters and in the memory cards of the receivers
(see "Record tran sm itt ers" on page 41 and
"Generate memory card" on page 42 respectively).

The code for each transmitter is generated with the
installation number and the transmitter number in
this installation.
1 Select the "Roller" tab.
2 Click on "Reserve Entries" in the alert screen.
3 Enter the number of transmitters to be reserved and
the number of the first transmitter (depending on the
number of users envisaged in the installation).

Each transmitter will be identified with a six digit
code (the code 000000 is not allowed).
4 The programme consecutively generates the code for
the required transmitters.

The transmitter user table is generated.