Erreka IRTAGPROG Manual Del Instalador página 37

Enter the password
Change the password
Application home screen
INSTALLATION, START-UP AND CONFIGURATION
1 Enter password 999999 (set as default) in the
"Password" box.

Enter the default password, which is 999999,
when running the application for the first time.
The password can then be changed.
2 Enter your name.
3 Click on "Continue" to enter the application
without entering
particularisation, see the next section ("Change the
password").

We recommend changing the password
after accessing the application for the first
time, in order to ensure nobody else can
gain access and modify any details.
O
Ensure the password is never lost or forgotten.
Should this happen, it would be impossible to
access the application and all the data stored
would be lost.
1 Go to the "Change Password" screen. This can be
done in two different ways:
• by clicking on the key-tag box "Change
password", or
• by clicking on the "ERREKA" icon
Change password
2 Enter the current and the new passwords.

The password must be a 6 digit code. The code
"000000" is not allowed.
A note is displayed after starting up the application for
the first time, indicating that there are no details for this
user and asking to create a new installation.

The application is now ready to use. This can be
done in two different ways:
• OPTION A: by creating a database to store the
data of the installations, transmitters, etc (as
described in
database" on page 35), or
• OPTION B: by working directly with the
console, without storing the information in the
database (as described in chapter "Working
without the database (console menu)" on
page 48).
IRTAGPROG console and "Roller and Key-Tag Management" application
your password.
chapter "Working with
For
>
the
33