Audio-Technica ATH-CKS55XBT Manual De Instrucciones página 5

● When this product is used for a long time, the headphones may become discolored due to
ultraviolet light (especially direct sunlight) or wear.
● The cable may become caught or severed if product is placed in a bag or pocket without adequate
protection.
● Connect/disconnect the cable by holding the plug. Pulling directly on the cable can result in a
broken wire and the risk of electric shock.
● Reception on the headphones is available only through the mobile telephone network.
Please note that performance of other types of phone reception (phones using other wireless
applications) cannot be guaranteed.
● If you use the headphones close to an electronic device or transmitter (such as a mobile phone), a
noise may be generated in the headphones. In this case, keep headphones away from the
electronic device or transmitter.
● If you use the headphones near a TV or radio antenna, noise may be generated in the television or
radio. In this case, keep headphones away from the TV or radio antenna.
● To protect the built-in rechargeable battery, charge it at least once every half year. If you leave it
too long, you will have less rechargeable battery life or the battery may not recharge at all.
Simultaneous use with other devices
Failure, such as the interruption of sound, may be caused by radio wave interference from devices that use
the same frequency band (2.4GHz) as the headphones, including Bluetooth -enabled devices, devices
using wireless LAN, digital cordless phones and microwaves. Similarly, because radio waves of the
headphones may affect these devices, take the following precautions:
- Install the devices using the same frequency band (2.4GHz) away from the headphones.
- Do not use the product in hospitals, trains and aircrafts.
Instructions for Use
Any device which is connected to the headphones needs to meet the Bluetooth standards established by
Bluetooth SIG and be certi ed.
Even if the device meets the Bluetooth standards, it might not connect to the headphones or the operation
method and behavior may differ depending on the device's characteristics and speci cation.
Cleaning
Get into the habit of regularly cleaning your headphones to ensure that they will last for a long time.
Do not use alcohol, paint thinners or other solvents for cleaning purposes.
● About headphones, Bluetooth receiver, and remote controller.
Wipe the main unit with a dry cloth. Foreign matter can accumulate within the earpiece attachment.
Continued use while dirty can cause the earpiece to detach easily. Wipe the dirt away periodically. Avoid
touching the sensitive port that emits sound; doing so can cause breakage or malfunction.
● About the cable and USB charging cable.
Wipe your cables with a dry cloth after use if there is sweat or other dirt. Using an unclean cable
continuously will deteriorate and harden the cable, resulting in headphone malfunction.
● For long-time storage, keep the headphones in a well-ventilated place without high temperatures and
humidity.
PRECAUTIONS
English
5