Kimex 164-4920 Manual Del Usuario página 134

SMA
get_mac_address
SSIP
ATOF
STVCH
Command
GETNUMBEROFUSB-
STORAGES
GETTOTALSPACE
GETFREESPACE
SAVEMODELINFO
SETSCHEDULER
GETSCHEDULER
Set mac address
Get mac address
Set static IP, Default
Gateway and
SubnetMask addresses
(seperate addresses with
"-" character)
Auto panel Off Mode
Set TV Channel
SIGNAGE SETTINGS COMMANDS
Description
gets number of
attached usb storages
get total usb space
(in MB)
get free usb space
(in MB)
saves model name
and sw version
to a removable device
enables/disables
scheduler
get scheduler enabled/
disabled
English - 51 -
string-int ( ex: eth0-
00:09:df:86:34:25)
none
string ( ex: 192.168.0.15-
10.0.90.5-255.255.255.0)
int ( 0 <= mode <=8)
int ( index of channel)
Parameter
no parameter
no parameter
or
usb index (numbers 1,2,....)
no parameter
or
usb index (numbers 1,2,....)
no parameter
string n (ON, OFF)
new command is available
with Ronesans_B2B r232185
- Raphael V7.36.0.0:
"SETSCHEDULER N_X"
(N is scheduler number, X is
"ON" or "OFF")
no parameter
------------------------------------
new command is available
with Ronesans_B2B r232185
- Raphael V7.36.0.0:
"GETSCHEDULER N" (N is
scheduler number)
#SetMacAdress Succesfull
#*FAILURE - Wrong parameter
value!
#*FAILURE - Invalid parameter!
#*FAILURE - Invalid mac address!
#*FAILURE - Could not write MAC
address!
#*Hwaddr: mac_address -
Succesfull
#IP address setting Succesfull
#set auto tv off mode to ...
#CURRENT PROGRAME IS
SETTED ...
Return
#*number of attached usb storages
is ... (numbers 0,1,2,...)
#*The total space is ... MB
or
#*Invalid index (only for
parametrized version)
#*The free space is ... MB
or
#*Invalid index (only for
parametrized version)
#*Model info is saved
OR
#*No Removable drive is
connected
(If there is no device connected)
#*The scheduler is set to .... (ON,
OFF)
#*The scheduler is .... (ON, OFF)