Combo Cooking Instructions - NuWave Duet 33816 El Manual Del Propietario

COMBO COOKING INSTRUCTIONS

AIR FRYING INSTRUCTIONS
COMBO COOK
Combo cooking allows you to set both pressure cooker settings and air
fryer settings at the beginning instead of programming in the middle of
cooking. PRESSURE, TEMP, TIME, DELAY, SEAR, STAGE, WARM,
and PROG are available for use with the Combo Cook function.
1. Plug the power cord into an
electrical outlet.
2. Press COMBO COOK.
• The lights will be on 1-2 seconds
then go out indicating those
functions are available for use. The
display will show pressure cook.
3. Set the pressure cooker settings.
4. Once pressure cooker settings have been entered, press
COMBO COOK a second time.
• The lights on SEAR, STAGE, TEMP, TIME, PROG, and WARM
will light up, indicating those functions are available for use.
• The display will show air fry, temp, and 360F.
5. Set the air fryer settings.
6. Press START/PAUSE when all settings are entered and the
pressure-cooking portion of your cooking is ready to go. Make
sure the Pressure Cooker Lid is properly in place. The Duet will
first cook the pressure cooker part of the recipe.
7. Allow the Duet to naturally release the pressure. To quick release
pressure, carefully turn the Pressure Release Switch/Valve to the
"OPEN" position until all steam/pressure is released. Remember
to always turn the Pressure Release Switch/Valve to the
"OPEN" position before opening the Pressure Cooker Lid to
ensure all pressure is released.
8. Replace the Pressure Cooker Lid with the Air Fryer Lid.
9. Press START/PAUSE again to resume the air- frying potion
of cooking.
10. When all cooking is complete, the unit will beep 3 times and the
display will show End.
Note: The Program function works the same as it does in both the
PRESSURE COOK and AIR FRY sections with one difference: In
order to activate the COMBO COOK, you will need to press COMBO
COOK. This will allow you access and save preset programs for
COMBO COOK.
30 30
combo cooking instructions