Time And Date Setting - Ravelli Touch Radio Manual De Instrucciones

��
The display is subdivided into three parts:
After 5 minutes of inactivity, the handheld display dims to "SLEEP" mode while maintaining the radio connection to the stove.
A subsequent press of the ON/OFF key reactivates the display.
1. It shows the current room temperature measured by the handheld set. Moreover, if you press the DOWN scroll key you will
1
��
display the temperature settings that can be changed using the two UP/DOWN keys. Any change made is confirmed automatically
The first press of any key with active display turns on its backlight, not interpreting it as a command.
within 3 seconds from the change or by pressing the confirmation key. A sound signal indicates that the change has been con-
firmed.
The display is subdivided into three parts:
1- It shows the current room temperature measured by the handheld set. Moreover, if you press the DOWN scroll key you will display
the temperature settings that can be changed using the two UP/DOWN keys. Any change made is confirmed automatically within 3
seconds from the change or by pressing the confirmation key. A sound signal indicates that the change has been confirme
2
In the inactive phases (combined with the 3rd part of the display) indicates the state of the stove.
In the active phases, it indicates the operating power of the stove.
In addition, by pressing the DOWN scroll button, you can display the power settings, that can be edited using the two scroll
keys
2- Icon indicating the status of the stove (see synthetic phase diagrams).
UP/DOWN: The confirmation of any change takes place automatically within 3 seconds from the change or by pressing the con-
3- In the inactive phases (combined with the second part of the display) indicates the state of the stove. In the active phases, it
firmation key. A sound signal indicates that the change has been confirmed.
indicates the operating power of the stove. In addition, by pressing the DOWN scroll button, you can display the power settings, that
can be edited using the two scroll keys UP/DOWN: The confirmation of any change takes place automatically within 3 seconds from
the change or by pressing the confirmation key. A sound signal indicates that the change has been confirmed.
3

Time and date setting

Time and date setting
Below are given the steps for accessing the relative menu
Below are given the steps for accessing the relative menu.
MENU
MENU
USER
USER
MANUFACTURER
TECHNICIAN
ENGINEER
PRODUCER
Press the key "access menu" to
access
the
MENU page
SETTING
SETTINGS
DATE - HOUR
DATE-TIME
ENABLE T.EXT
ENABLE EXT. TH.
CONTRAST CONTRAST
FW VERSION
VERSION FW
ADJUST
ADJUST
LANGUAGE
LANGUAGE
Press the key
"confirm" to
access the
SETTINGS
page
Use and maintenance manual Phandheld Touch Radio
User's manual HANDHELD TOUCH RADIO
LOADING AUGER
CHRONOTHERMOSTAT
CHRONOTHERMOSTAT
SET AIR-PELLET
STOVE STATUS
Press the key
"confirm"
to access the
USER page
Press the key "con-
firm"
to access the page
DATE-TIME
Press the increase key to change every single value
Press the increase key to change every single value
Press "confirm" to confirm the settings and switch to the next
value.
By pressing the key "back" for several times you will display
the stand-by page.
USER
USER
SCREW FEEDING
AIR-PELLET SET
STOVE STATE
Press the key "selection" for
to switch to the second page
of USER MENU and select
Rev.0 17/05/2021
Pag.23
Vers. 01 of:07.04.14
Pag.21
USER
USER
COMFORT CLIMA
COMFORT CLIMA
SETTINGS
SETTING
"selection"
SETTINGS.
EN