Single Ducting - Ravelli Touch Radio Manual De Instrucciones

Single ducting

This function allows you to manage distribution of warm air between the room where the stove is installed and the room where the duct arrives.
The function has two operating modes: manual and automatic.
Manual mode: the user manually sets distribution of warm air between front ventilation and ducting.
Automatic mode: the stove automatically manages distribution of warm air between front ventilation and ducting, according to the temperatures
in the rooms.
Management
The following are the steps to be followed to access the relative menu, starting from the Home screen.
MENU
USER
TECHNICIAN
MANUFACTURER
Press the
"Access to menu" key to
access the MENU screen
Press the
"confirm" key to
go to the MANUAL
or AUTOMATIC
selection screen
Pressing exit brings you to the DUCTED menu to set the other function variables in the menu.
Press the key repeatedly to exit the MANAGEMENT screen and to go back to the "Home" screen.
Ventilation (manual mode)
MENU
USER
TECHNICIAN
MANUFACTURER
Press the
"Access to menu" key to
access the MENU screen
The top of the display shows the front ventilation speed, which is linked to the stove output (e.g.: Front 5), the bottom of the display
shows the ducting output, which can be modified with the "increase/decrease" keys. The value which can be set goes from 0 (ducting off)
to 5. Set at A (auto) the output of the ducting fan follows the output of the stove.
To go back to the DUCTED menu, press the "back" key once; to go back to the Home screen, press the "back" key several
times.
��
The TEMPERATURE and CUBATURE submenus cannot be accessed when in manual mode.
Use and maintenance manual Phandheld Touch Radio
CHRONOTHERMOSTAT
Press the
"confirm" key
to access the
UTENTE [USER] screen
Press the
"return to menu" key to quit the
screen; press the "selection"
key to go to the "AUTO"
function and activate by
confirming "V"
CHRONOTHERMOSTAT
Press the
"confirm" key
to access the
UTENTE [USER] screen
Press the
"increase/decrease" keys
to modify ducting ventilation.
USER
DUCTED
FEED SCREW LOAD
SET AIR-PELLET
"confirm" key
to go to the item
CANALIZZATA [DUCTED].
USER
DUCTED
FEED SCREW LOAD
SET AIR-PELLET
"confirm" key
to go to the item
CANALIZZATA [DUCTED].
Press the "selection" key to
go to the item VENTILATION
Rev.0 17/05/2021
Pag.31
DUCTED
MANAGEMENT
TEMPERATURE
VENTILATION
CUBATURE
VIEW STATUS
Press the
DUCTED
MANAGEMENT
TEMPERATURE
VENTILATION
CUBATURE
VIEW STATUS
Press the
EN