Rev.0 17/05/2021
EN
Pag.42
Glass cleaning
With a cold stove, clean the glass with a cloth and glass cleaner.
Note: there are stove glass cleaning products available on the market.
Cleaning the tube heat exchanger
During operation, dust and soot are deposited on the surface of the heat exchanger tubes. To ensure smooth operation throughout
the season, it is advisable to periodically clean the heat exchanger when the stove is cold.
step
action
1
Using the cold handle, extract the scraper rod.
2
Firmly move the scraper back and forth.
3
Once you have finished cleaning the exchanger, push the scraper into the grille (never leave it removed).
Combustion chamber cleaning
To clean the ash drawer, proceed as follows:
step
action
The stove requires a simple yet frequent cleaning in order to guarantee suitable yield and regular operation. Vacuum the
1
combustion chamber every day using a bin ash vacuum, making sure that the ashes are completely cold.
Cleaning the pellet tank
To clean the pellet tank, proceed as follows:
step
action
1
Periodically remove the wood sawdust accumulated on the bottom of the tank, using a vacuum cleaner.
Extraction duct cleaning
⚠
Periodically check that the extraction duct is free from obstructions (dust, animal hair ...) and remove them if necessary.
In stoves with RDS technology, it is necessary to be extremely careful not to break the air flow sensor.
⚠
Extraordinary maintenance
⚠
Extraordinary maintenance activities must be carried out by staff from the Authorised Assistance Centre.
Do not wait for components to be deteriorated by use before proceeding with their replacement. Replace a worn component
before it is completely broken to prevent any damage caused by sudden component breakage.
Schedule the above extraordinary maintenance activities with the Authorised Assistance Centre.
Use and maintenance manual Phandheld Touch Radio
PARTS/FREQUENCY
Deep combustion chamber cleaning
Door gasket
Chimney
Smoke conduit
1 SEASON
•
•
•
•