Cooling Mode; Fan Mode - universalblue UAP1903-21 Manual De Instrucciones

 TIMER BUTTON: Press this button when the device is stopped to
set when you want it to turn on. Press the button again to set the
off time.
 C/ºF BUTTON: used to change from degrees Fahrenheit to
degrees Celsius.
 NIGHT BUTTON: press to select sleep mode when the device is
running cold.

COOLING MODE

 When the device is switched on, this mode will automatically be
selected, but it can also be selected on the control panel. The
indicator light in this mode will light up.
 In this case, the device will expel cold air and will operate in the
air conditioning mode.
 Press the corresponding buttons to increase/decrease the
temperature (from 16º to 30º).
 Press the speed key to select the appropriate speed.

FAN MODE

 Select this mode via the device's control panel or with the remote
control, the indicator light in this mode will light up.
 In this case the device will only expel air and will operate in the fan
mode.
 Select the desired speed (High/Low).
 The temperature cannot be selected in this mode.
DRY MODE/ DEHUMIDIFYING MODE
42