WATER DRAINAGE
The air conditioner evaporates condensed water
and discharges the moisture through the hot air
outlet.
But in some cases it is possible that the unit is not
to condensate water evaporation, then the internal
water tank is full, the FULL lamp will illuminate and
unit will stop running.
Follow the steps to drain water
Unplug the air conditioner, disconnect the
exhaust hose from the back, and move the
conditioner to suitable drain location or
outdoors.
Remove the base stopper from the base water outlet to drain
water.
Once the internal water tank is drain, reinstall the base stopper,
make sure it is on securely.
Place the air conditioner in the desired location, reconnect the
exhaust hose, and plug in the air conditioner. The unit will
operate normally.
TO AVOID ACCIDENTS CAUSED BY ELECTRIC SHOCK, MAKE
SURE THAT NO POWER IS SUPPLIED TO THE UNIT BEFORE
STARTING MAINTENANCE OR REPAIR.
AIR FILTER CLEANING
If the air filter is blocked by the accumulation of a large amount of
dust, the volume of the air flow will be reduced. Clean the filter once
every two weeks.
Open and clean the air filter:
Directly fasten the hook at the bottom to remove the air filters in
the direction of the arrow.
48