Timer Mode; Sleep Mode - universalblue UAP1903-21 Manual De Instrucciones

 Select this mode via the control panel
of the device or with the remote
control, the indicator light in this
mode will light
 This mode has the particularity of
regulating the temperature of the
room automatically and acting as a
dehumidifier.
 Remove the water plug (see right),
insert one end of the pipe into the
drain hole and the other end into the
water tank.
 If the temperature is equal to or greater than 17 ℃ (or 62 ° F), the
compressor turns on. Thereafter, it is controlled according to the
following rules: the compressor is turned off when Ta ≤ 15° C (or
59° F) and restarted when the temperature rises to Ta ≥ 17° C.
 In this case, the speed cannot be adjusted and it always works at
low speed by default.
 The temperature cannot be selected in this mode either.

TIMER MODE

 When the device is on standby, press the timer key to set the
power on time. Press the Up and Down keys to set the power on
time (0 ~ 24 H).
 The timer indicator light will light up when this option is in use.
 At any time when the device is in operation, press the timer key to
remove the timer function. Use the up and down arrows to set the
timer to 0. If you want to set the shut-off time, press this button
while the device is in operation and set the shut-off time.

SLEEP MODE

 In cold mode, press "SLEEP" on the remote control; or press Timer
and the down button on the control panel simultaneously;
 The speed in this case cannot be adjusted manually. In this mode,
the fan will be forced to work at low voltage.
 The low speed indicator light will come on.
43