2- Remove pin A and push the knob to the "REAR UNLOADER" position (fig.23 below). Replace
the pin to latch the knob.
3- Open the front shield B and remove the pin from the sprocket D.
4- Close the shield B.
REAR
UNLOADER
A
B
TIP: If you find it difficult to place the knob in the indicated position, quickly turn on and off the tractor
power take-off. The movement of the mechanism will facilitate the adjustment.
Rear unloader
The tractor power take-off must be disconnected:
1- Completely open the two rear doors of the wagon.
SIDE
UNLOADER
fig.23
D
(Wagon with helix transporter)
FORAGE WAGON
fig.24
fig.25
Keep the pin in the sprocket.
fig.27
fig.26
17