KPS -AN10 Manual De Funcionamiento página 10

1. SAFETY INFORMATION
Please read carefully the following safety information before usage and main-
tain this anemometer while using it according to operating guidance, otherwise,
the anemometer may be damaged. The anemometer will provide satisfactory
services to you if you use and protect it appropriately.
1.1 Preparation
• Please check for damage during transportation after receiving the anemom-
eter.
• If it should be stored and shipped under hard conditions, please confirm that
whether the meter is damaged.
1.2 Usage
• The meter should be used in the range of specified ambient temperature
and humidity.
• If you notice any abnormality or failure, it should stop using.
• Don't store or use the meter under the conditions of direct sunlight, high
temperature and high humidity.
• Don't touch the fan blades with excessive force.
• Don't directly expose the blades in the hard light to avoid reading error.
1.3 Marcas
The mark indicates compliance with EMC requirements.
1.4 Maintenance
• Repair or maintenance should be implemented by trained personnel.
• If there is dust on the fan blade, please blow it with clean air or scrub gently
with a damp cloth and mild detergent.
• Clean the meter with a damp cloth and mild detergent. Don't use abrasive
material or solvent.
• The meter should be powered off when it is not in use.
• The meter will consume small current, about ≤ 5μA, after shutdown. If the
meter is not to be used for a long period, batteries should be removed to
prevent damaging the meter.
2. DESCRIPTION
• This meter is a digital anemometer for measuring the ambient temperature,
humidity, dew point temperature, wet bulb temperature, wind speed, and air
KPS-AN10 • Digital anemometer
10