Button Description - KPS -AN10 Manual De Funcionamiento

KPS-AN10 • Digital anemometer

2.2 Button description

• Button:
- Switch for meter powering on/off..
• Button:
- Switch for turning on/off the backlight.
• HOLD Button
- Hold display of LCD.
• FUN Button
- It is used for switching among the functions of wind speed measurement,
area setting and air volume measurement. Long press for three seconds to
enable or disable "Auto Power-Off" function.
• MAX/MIN Button
- Switch maximum/minimum/normal mode, long press to exit.
• UNIT Button
- Switch unit, area (m², ft²), long press to switch (°C, °F)
Wind speed (m/s, km/h, mil/h, ft/m, ft/s, knots),
Air volume (CMS, CMM, CFM).
2.3 Sign definition
HOLD
VEL
FLOW
AREA
SLOW
FAST
MAX
Indicates Auto Power-Off status
Reading hold state
Wind speed measurement state
Air volume measurement state
Area setting required by air volume
Indicates current wind-speed <5m/s
Indicates current wind-speed >5m/s
Displays maximum after entering maximum/minimum
mode
13