Declaration Of Conformity; Wey-Tek Refrigerant Charging Scale - Inficon WEY-TEK Manual Del Usuario

Declaration of Conformity

This is to certify that this equipment, designed and manufactured by INFICON Inc.
2 Technology Place, East Syracuse, NY 13057 USA meets the essential safety
requirements of the European Union and is placed on the market accordingly. It
has been constructed in accordance with good engineering practice in safety
matters in force in the Community and does not endanger the safety of persons,
domestic animals or property when properly installed and maintained and used in
applications for which it was made.
Equipment Description . . . . . . . . . Wey-TEK Refrigerant Scale and
Applicable Directives . . . . . . . . . . 73/23/EEC as amended by 93/68/EEC
Applicable Standards . . . . . . . . . . EN 61010-1: 1993, EN 61326: 2000-11,
CE Implementation Date . . . . . . . January, 2005
Authorized Representative . . . . . . Duane Wright, Manager-Quality Assurance
Any questions relative to this declaration or to the safety of INFICON products
should be directed, in writing to the quality assurance department at the above
address.
Thank you for buying the Wey-TEK Charging Scale and
Charging Module!
The Wey-TEK and its companion Charging Module offer an innovative design in
refrigerant measurement and charging. Use the Wey-TEK Scale for manual
recovery and/or charging measurement. Or, add the Charging Module to give you
a fully automatic charging station.
The Weighing Platform, Control Hand Piece and Charging Module are not
restricted to an individual Wey-TEK scale. Each component is interchangeable
with other Wey-TEK scales (with part numbers beginning with 713) and can be
replaced at any time.

Wey-TEK Refrigerant Charging Scale

The Wey-TEK scale's few controls allow for easy operation. See the diagram
following for the location of items on the scale. The following buttons and
operating instructions apply if you are using the Weighing Platform with the
Control Hand Piece instead of the Charging Module.
Charging Module
89/336/EEC as amended by 93/68 EEC
EMC Cl A, Immunity Criteria B
INFICON Inc.
2