Troubleshooting / Error Messages - Inficon WEY-TEK Manual Del Usuario

Troubleshooting / Error Messages

The Wey-TEK control handpiece and Charging Module display various error
messages to let you know when there is a problem with the scale or its operation.
Refer to the chart below for information on the error messages.
Error Message
Displayed
Over Range
Over Range
Remove Weight
Voltage too High
Voltage too Low
Reason for
Error Message
The weight on the
weighing platform is
greater than the
capacity of the scale
(100 kg/220 lb).
The scale cannot
automatically Tare
because the scale's
capacity was
exceeded when the
scale was powered
on.
The line voltage into
the Charging Module
exceeds 15.5 volts.
This can potentially
damage the scale and
charging module.
The line voltage into
the Charging Module
is below 10 volts. This
can potentially
damage the scale and
charging module.
8
Action to Take
Remove the weight.
Do not exceed 100
kg/220 lbs of weight.
Remove the weight.
Do not exceed 100
kg/220 lbs of weight.
Find a different outlet
to plug the AC/DC
power adapter into.
Find a different outlet
to plug the AC/DC
power adapter into.