Zanussi ZWT 71401 WA Manual De Instrucciones página 12

2. If necessary, change the spin speed or add
available options. When you activate an
option, the indicator of the set option comes
on.
To reset a programme or switch the machine
off, turn the programme knob to
If you set something incorrect, the
display shows the message
Starting a programme without the delay
start
Press the button Inicio/Pausa.
• The indicator of the button Inicio/Pausa
stops to flash and stays on.
• The programme starts, the door locks,
the indicator
• The programme starts and the door
locks.
• The programme time decreases with
steps of one minute.
The drain pump can operate for a
short time at the beginning of the
washing cycle.
Starting a programme with the delay
start option
1. Press the button Inicio Diferido again and
again until the display shows the delay you
want to set. The delay start indicator comes
on.
2. Press the button Inicio/Pausa:
• The door is locked and the indicator
is on.
• The appliance starts the countdown.
• When the countdown is completed, the
programme starts automatically.
You can cancel or change the set of
the Inicio Diferido option before you
press the button Inicio/Pausa. After
pressing the button Inicio/Pausa you
can only cancel the Inicio Diferido
option.
To cancel the Inicio Diferido option:
a. Press the button Inicio/Pausa to set the
appliance to pause. The indicator of
button Inicio/Pausa flashes.
b. Press the button Inicio Diferido until the
display shows
Press the button Inicio/Pausa again to
start the programme immediately.
12
position.
.
is on.
.
Cancelling a programme
1. Turn the programme knob to position
cancel the programme and to deactivate the
appliance.
2. Turn the programme knob again to activate
the appliance. Now, you can set a new
washing programme.
Before starting the new programme
the appliance drains the water. Make
sure that the detergent is still in the
detergent compartment, if not fill the
detergent again.
Interrupting a programme and changing
the options
You can change only some options before they
operate.
1. Press the button Inicio/Pausa.
The indicator flashes.
2. Change the options.
3. Press the button Inicio/Pausa again.
The programme continues.
Opening the door
While a programme or the Inicio Diferido
operates, the appliance door is locked. The
indicator is on.
CAUTION!
If the temperature and level of the
water in the drum are too high and
the drum still rotates, you cannot
open the door.
To open the door during the first minutes of the
cycle or when the Inicio Diferido operates:
1. Press the button Inicio/Pausa to pause the
appliance.
2. Wait until the indicator
3. You can open the door.
4. Close the door and touch the button Inicio/
Pausa again. The programme (or the Inicio
Diferido) continues.
At the end of the programme
• The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
• In the display comes on.
to
goes off.
www.zanussi.com