Know Your Winch - Warn PN 64500 Manual Del Usuario

• Attach the 36 in. (0.9m), 6 ga. red wire to the
positive red contactor post and battery (shrink
wrapped end to battery). Attach the 36 in. (0.9m), 6
ga. black wire to the black contactor post and
battery.
• When possible, route the winch kit power (red) and
ground (black) wires along the ATV's existing wire
routing paths under the seat and battery location
areas. Ensure the wiring is not pinched when the
seat is reinstalled.
• Attach the contactor to the predetermined position
on the ATV. Assure that cables do not cross sharp
edges, moving parts, or contact items that may
become hot.
• Secure loose wiring with zip ties or electrical tape
prior to final ATV reassembly.
Step Six: System Check
Before using the winch, verify the following:
OUT IN
• Wiring to all components is correct. All loose wires
are tie wrapped tight.
• There are no exposed wiring or terminals. Cover
any existing terminal exposures with terminal
boots, heat shrink tubing or electricians tape.
• Turn ATV key switch to ON position. Check winch
for proper operation. The wire rope should spool
in and out in the direction indicated on the
switch.

KNOW YOUR WINCH:

• Take time to fully understand your winch and
the winching operation by reviewing the Basic
Guide to Winching Techniques included with
your winch.
Service
Should you encounter a problem during installation or
operation of your winch, please follow these steps
toward resolving the problem:
1. Refer to your operator's guide and installation
instructions. It has illustrations and detailed
information on the installation and safe and
proper operation of your winch. it also includes
a replacement parts list and assembly
diagrams. If you are unable to resolve the
problem, then go to step 2.
| Warn Industries, Inc.
7
CAUTION!
2. Contact your dealer where you purchased your
winch. If, after discussing the problem with their
with their parts and service staff, you are still
unable to resolve the problem then go to step 3.
3. Call an Authorized WARN Service center from
the list provided on the back of the warranty
sheet included with the product. When calling,
please have the following information available:
winch model number and purchase date,
make, model and year of ATV.
4. If you are unable to resolve the problem to your
satisfaction, please call Warn Industries
Customer Service at: 1-800-543-9276. When
calling, please have the following information
available: winch model number and purchase
date, make, model and year of ATV. You may
also contact Warn Industries by visiting our
website: www.warn.com.
Warranty
Please refer to the warranty sheet enclosed with
your winch for details.
Replacement Part Numbers
Ordering information: Parts may be obtained
through your local dealer or distributor.
Part Number Description
PN 60076 Wire rope assembly, 3/16" x 50'
PN 36031 Motor, 2.5ci, 12 VDC
PN 62135 Contactor, 12 VDC
PN 64849 Remote control, 10 ft.
PN 62258 Remote control socket
PN 28929 Roller fairlead kit
PN 39557 Hook, 5/16 Clevis slip with strap
PN 38293 Strap, hook
The above list represents the most commonly
requested replacement parts. A full listing of
replacement and service parts are available.
Check with your WARN authorized dealer or on the
web: www.warn.com
WARN 2.5ci Winch Multi-Mount Installation and Specification Guide |
8