Discontinuing A Measurement - Microlife BP3MY1-1P Manual De Instrucciones

measurement. When the device has detected
the pulse, the heart symbol in the display
begins to blink.
d) When the measurement has been concluded,
air in the cuff is released. The measured systolic
and diastolic blood pressure values as well as
the pulse are now displayed. (Pulse=number
of heartbeats each minute) Example (Fig.):
Systolic 118, Diastolic 73, Pulse 75. The
measurement results are displayed for about
one minute.

5.5. Discontinuing a measurement

If it is necessary to interrupt a blood pressure
measurement for any reason (e.g., the patient
feels unwell), the ON/OFF button can be pressed
at any time. The device then immediately lowers
the cuff pressure automatically and enters into
sleep mode.
15