Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Rated voltage
Rated power
No load speed
Impact rate
Drilling capacity max
Protection class
Weight
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K
& K
:
pA
wA
Wear ear protection when sound pressure is over
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Impact drilling into concrete:
Drilling into metal:
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
To use the correct accessory for the tool and ensuring it is sharp and in good condition.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
26
Steel
Masonry
Wood
Vibration emission value a
Uncertainty K = 1.5m/s²
Vibration emission value a
Uncertainty K = 1.5m/s²
230-240V~50Hz
= 18.81m/s
2
h ID
= 2.03m/s
2
h ID
710W
0-2800rpm
0-44800bpm
10mm
13mm
30mm
/II
1.6kg
91.3dB(A)
102.3dB(A)
3.0dB(A)
80dB(A)
Publicidad
