Publicidad
Idiomas disponibles
Idiomas disponibles
WORKING HINTS FOR
YOUR IMPACT DRILL
1 Drilling masonry and concrete
Select the drill/impact action selector switch to
the "hammer symbol" position. Tungsten carbide
drill bits should always be used for drilling
masonry, concrete etc with a high speed.
2 Drilling steel
Select the drill/impact action selector switch to
the "drill symbol" position. HSS drill bits should
always be used for drilling steel with a lower
speed.
3 Pilot holes
When drilling a large hole in tough material (i.e.
steel), we recommend drilling a small pilot hole
first before using a large drill bit.
4 Drilling tiles
Select the drill/impact action selector switch to
the "drill symbol" position to drill the tile. When
tile has been penetrated, switch over to "hammer
symbol" position.
5 Cool the motor
If your power tool becomes too hot, set the
speed to maximum and run no load for 2-3
minutes to cool the motor.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
There are no user serviceable parts in your
power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean
with a dry cloth. Always store your power tool
in a dry place. Keep the motor ventilation slots
clean. Keep all working controls free of dust.
Occasionally you may see sparks through the
ventilation slots. This is normal and will not
damage your power tool.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
TROUBLESHOOTING
1. If your power tool does not start, check the plug
on the power supply first.
2. If the drill doesn't work properly, check the drill bit
for sharpness, replace drill bit if worn. Check that
the drill is set to forward rotation for normal use.
32
3. If a fault can not be rectified, return the tool to
an authorized dealer for repair.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your Local Authority or retailer for recycling
advice.
GUARANTEE
This product has been manufactured to the
highest standards. It is guaranteed against
faulty materials and workmanship for at least 24
months from purchase. Please keep your receipt
as proof of purchase. If the product is found to
be defective within the duration of the guarantee
period, we will either replace all defective parts
or, at our discretion, replace the unit free of
charge with the same item or items of a greater
value and /or specification.
This warranty is invalid where defects are caused
by or result from:
1. Misuse, abuse or neglect.
2. Trade, professional or hire use.
3. Repairs attempted by unauthorized repair
centres.
4. Damage caused by foreign objects,
substances or accident.
Ehlis S.A.
c/. Sevilla s/n. Polígon Industrial Nord-Est 08740
Sant Andreu de la Barca Barcelona-España
Publicidad
