Support Bar Installation - OVE SIERRA 60 Manual Del Usuario

1-2. Slide the two stoppers (E) on the bar (F), then mount the bar anchors (D) without tightening.
3. Mount the bar (F) on the panel (C). Don't over tighten the brackets (G) in order to adjust the bar level.
Make sure the glass protection gaskets are in place on either side of the glass panel.
4. Make sure the bar is properly leveled and mark the outline of the anchors (D) on the wall.
5-6. Temporarily remove the assembly bar (F).
1
D
E
2
F
E
3
D
G
C
2.5mm

SUPPORT BAR INSTALLATION

F
D
F
10
4
D
F
C
5
D
G
F
C
2.5mm
6
D
F
E