OVE SIERRA 60 Manual Del Usuario página 11

1. Mark the location of the two anchors holes (D) on the wall.
2. Drill pilot holes at the marked place.
3. Install the bar anchors (D) using wall anchors (AA) and screws (GG).
Note: Before continuing, place the door panel (J) inside the shower enclosure to facilitate future steps!
4-5. Replace the bar (F) on the panel with the stoppers (E) and the bar anchors (D). Use a ratchet to
strongly tighten the bolts.
6. Unscrew the aluminum profile (V) from bar anchor (D), and install them at the bar extremities.
1
D
2
Φ8mm
3
AA
GG
SUPPORT BAR INSTALLATION
11
4
D
F
E
5
G
F
C
2.5mm
6
V
D
F
C
2.5mm