Stihl Smart Connector Manual De Instrucciones página 8

diameter of 3 mm or 4 mm as
described in the app.
► If using rivets to fit the Smart Con‐
nector: use a suitable drill with a
diameter of 3.5 mm.
► Drill the holes from the inside of
each housing part, always when
dismantled.
► If using screws to fit the Smart Con‐
nector: tighten the screws so that
there is no play.
► If using the STIHL Smart Connector
on a STIHL product: always attach
the Smart Connector to the site
described and shown in the app
and always attach the Smart Con‐
nector in the manner described and
shown in the app and under
https://connect.stihl.com/
► If using the STIHL Smart Connector
on a third party product: follow the
instructions in the third party prod‐
uct manufacturer's instruction man‐
ual.
► Never bridge the battery terminals
with wires or other metal objects.
► Observe polarity (+/-) when instal‐
ling the battery. The "+" pole points
toward the cover.
Maintenance, Storage and Repairs
WARNING
■ Harsh detergents, cleaning with a
water jet or pointed objects can dam‐
age the Smart Connector. If the
Smart Connector is not properly
cleaned, parts may not function cor‐
rectly and safety devices can be disa‐
bled. They may cause serious injury
to persons.
► Keep Smart Connector free from
foreign substances. If required,
clean with a dry cloth or a dry, soft
brush.
8
► Do not use cleaning agents or sol‐
vents.
► Do not clean the Smart Connector
with a pressure washer or spray it
with water or other liquids.
■ Children are not aware of and cannot
assess the dangers of the Smart
Connector. Children may be seriously
injured.
► Store the Smart Connector out of
the reach of children
■ Moisture may cause the electrical
contacts on the Smart Connector and
metal components to corrode. The
Smart Connector may be damaged.
► Store the Smart Connector in a
clean, dry state.
Battery
.
WARNING
■ The battery is not protected against
all ambient conditions. If the battery is
exposed to certain ambient condi‐
tions, the battery may catch fire or
explode. This may result in serious
injury to people and damage to prop‐
erty.
► Protect the Smart Connector from
heat and naked flames.
► Do not throw the Smart Connector
into a fire.
► Use and store the Smart Connector
at temperatures between - 30 °C
and + 60 °C.
► Do not immerse the Smart Connec‐
tor in liquids.
► Do not expose the Smart Connector
to high pressure.
► Do not expose the Smart Connector
to microwaves.
► Protect the Smart Connector from
chemicals and salts.
■ Liquid may leak out of a damaged
battery. If that liquid comes into con‐
0457-399-0007-B. VA1.E21.