Navigating Through The Menu - Van Gerven Eco Switch Manual De Instrucciones

- Never submerge this device in water.
- Never install the unit in an area subject to full sunlight.
- Only install the device in a dry and well-ventilated area.
- Keep children away from this device and from the cable.
- This product may only be used according to the guidelines described in this manual.
Eco Switch instructions for use
Important!
Never use an additional timer.
The device must always be connected to the mains.
As soon as the Eco Switch is switched on (i.e., the plug is placed into the socket), the programme will carry out a self-test.
The display will automatically show the following, one after the other: 8888 (display test); r and software version number; 50H or 60H indication
of the mains frequency.
Then, the display will show TSET, alternating with the time that has not been set yet (00.00).
This means that the time must be set as a first step, see Drawing 1.
You enter the clock menu directly by holding down the button for 3 seconds. In this menu, it is possible to modify the hours of the day in steps
of one hour by briefly pressing the button. Press the button for 3 seconds as soon as you have reached the correct hour. Then you can set the
minutes. The minutes are increased by 1 each time you briefly press the button. If the button is pressed for a longer period of time, the minutes
will start running faster. Release the button as soon as the correct time is shown on the display. The correct time will be set 10 seconds after
the pushbutton is released. The set time will be lost if the plug is removed from the socket, and will have to be re-set. The setting of the operating
times of pump 1 and pump 2 will be maintained after a power cut.
Status overview
Drawing 2
You can navigate through the status for each hour of the day by briefly pressing the button.
The status overview of the pump settings (PSET) will be displayed if you briefly press the button in the rest position. You will see the hour (0-23)
alternating with the preset status. This indicates if pump 1/pump 2 is switched on or off.

Navigating through the menu

Drawing 3
Pressing the button 1x 3 seconds will take you to the main menu, where first 'PSET' will appear on the display. By briefly pressing the button
once more, you can switch between 'PSET' and 'TSET'. As soon as you have reached the desired control menu, it can be selected by again pressing
the button for 3 seconds.
Pressing the button for 1x 3 seconds will take you to the main menu. The main menu contains 2 control menus for the different applications.
By briefly pressing the button, you will be able to navigate through these various control menus. As soon as you have reached the desired control
menu, it can be selected by again pressing the button for 3 seconds.
PSET: setting the pumps
tSET: Setting the time.
Setting Pump 1 and Pump 2
Drawing 4
Pressing the button 1x 3 seconds will take you to the main menu, where first 'PSET' will appear on the display. You can select this menu by
keeping the button down for 3 seconds. In the 'PSET' menu, you can select from 24 hour positions by briefly pressing the button. Here, you can
select the hour for which you would like to enter a setting. The default value of the device is 'off' for every hour. The hour positions are linked
to the real-time clock. For example, position 01 is 1 a.m. at night, and position 20 is 8 p.m. (20:00 hrs) in the evening. As soon as you have reached
the position (i.e. the time) you would like to select, you can confirm this by holding the button down again for 3 seconds. The screen will display
'PS.00', alternating with 'OFF'. You can then switch between 'OFF', 'P1' and 'P2' by briefly pressing the button. 'Off' means that the pump in
question is switched off. 'P1' means that the device plugged into the first socket will be supplied with power at the time in question. 'P2' means
that the device plugged into the second socket will be supplied with power at the time in question. You can make a selection by briefly pressing
the button, and confirm the selection by holding the button down for 3 seconds. You will then automatically return to the overview of the hours,
where you can select and set another time. If you do nothing after entering your selection, the device will store the selected setting after 10
seconds and return to the operating position. It is not possible to operate P1 and P2 simultaneously. The maximum wattage of the connected
device is 400 Watt. Heavier devices are not suitable for the Eco Switch.
5