BOX CONTENTS
1
FILTER SYSTEM
SUMP 1
3' X 1/4" WHITE TUBING (2)
A
1/4" BRASS TEE
B
C
BRASS NUT
D
PLASTIC COLLAR (2)
E
BRASS TUBE INSERT
Please read entire manual to ensure all parts listed are present before installation.
If any part is missing or damaged let us know by calling 877.333.7108.
Do not attempt to install the filter.
Tools recommended for installation:
• Variable speed drill w/ 7⁄32" bit
• Adjustable wrench
• Measuring tape
• Bucket
• Phillips head screwdriver
• Hammer
Note: We recommend using an approved or certified professional if drilling is required.
NEED HELP? GIVE US A CALL 877.333.7108
FAUCET
SUMP 2
FILTER CARTRIDGES (2)
(PRE-INSTALLED IN SUMPS)
WRENCH
FAUCET RUBBER WASHER
F
FAUCET SPACER
G
FAUCET WASHER
H
I
FAUCET NUT
CHROME NUT
J
SCREWS WITH PLASTIC ANCHORS (2)
K
PLASTIC TUBE INSERT
L
Faucet may be mounted on sink using an
existing hole for a sprayer nozzle or soap
dispenser, or by drilling a hole no more
than 1/2" in diameter. Ensure location of
faucet allows spout to extend slightly
past the edge of sink.