Uninstalling The Base - Britax B-SAFE GEN2 FLEXFIT Guia Del Usuario

B-SAFE GEN2 FLEXFIT & FLEXFIT PLUS User Guide

Uninstalling the Base

Lower Anchor Installation
1� Press the lower connector
release button on the top
of the base to loosen the
straps�
2� Press each of the red
release buttons on the
lower connectors and
release vehicle anchors�
3� Store the lower connectors in the storage slots in the
base until reinstalling� Pull on the lower connector straps
in center of base to remove slack�
Lap Shoulder Belt Installation
1� Unbuckle the vehicle belt
and remove from the lock-
off� Pull the belt from the
base belt routes�
Lap Belt Installation
1� Unbuckle the vehicle belt
and pull the belt from the
base belt routes�
19