Publicidad
Idiomas disponibles
Idiomas disponibles
o Mount the sensor at a minimum height of 1 m above the
ground. If installed under garage eaves, make sure that the
sensor is not blacked by gutters and the like.
o If installed at a height of 2 m or more, the sensor should be
aimed downward and pointed toward the area to be monitored.
o Make sure the installation spot is flat, dust-free, protected from
rain and other weather elements, and not prone to vibrations.
2.
Use the installation holes on the devices to determine the
distance of the mounting holes. Drill the holes and install the
sensor and receiver using the included mounting accessories.
Remember to install the receiver within 120 m of the sensor.
7.
Operation
1.
Switch on the receiver. Allow about 30 seconds for warm-up.
The receiver will emit two short beeps, indicating the unit is
working.
2.
Test the sensor by walking into the covered area. Relocate or re-
install the sensor or receiver if no alarm is heard.
3.
Finally, select the desired volume and melody.
8.
Cleaning and Maintenance
Occasionally wipe with a damp cloth to keep it looking new. Do not
use harsh chemicals, cleaning solvents or strong detergents.
9.
Technical Specifications
sensor module
passive infrared (PIR) motion detector
transmitter...............................................433 MHz
.................................... range ≤ 10 m in open area
sensor detection ................................... 110° angle
............................ @ 8 m, installation height 1.2 m
low battery LED indicator
power supply ...................... 3 x AAA LR03 (not incl.)
V. 02 – 30/03/2018
HAM220
6
©Velleman nv
Publicidad
