Making The Electrical Connection - HAMPTON BAY Havana Guía De Uso Y Cuidado

Assembly - Hanging the Fan (continued)
6

Making the electrical connection

WARNING: Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more than
one house wire to connect to the fan wiring, consult an electrician
for the proper size wire nuts to use.
IMPORTANT: Use the plastic wire connectors supplied with your
fan. Secure the connectors with electrical tape and ensure there
are no loose strands or connections.
□
Connect the two green fan wires (II) to the household wire (II).
□
If you are using the optional light kit, connect the blue fan
wire (JJ) and the black fan wire (KK) to the black household
wire (KK).
□
Connect the white fan wire (LL) to the white household wire
(LL).
□
Spread the wires apart so that the green (II) and white (LL)
wires are on one side of the outlet box (MM) and the black
wire (KK) is on the other side.
□
Turn the plastic wire connectors upward and push the wiring
into the outlet box (MM).
MM
JJ
LL
KK
LL
7
Mounting the fan
WARNING: When using the standard ball/downrod mounting, the
tab in the ring at the bottom of the mounting bracket must rest in
the groove of the hanger ball. Failure to properly seat the tab in
the groove could cause damage to the wiring.
□
Align the locking slots of the ceiling canopy (C) with the two
screws (M) in the slide-on mounting bracket (A). Push up to
engage the slots and turn clockwise to lock in place.
□
Firmly tighten the two mounting screws (M).
□
Install the remaining two mounting screws (M) into the holes
in the canopy (C) and tighten firmly.
□
Install the decorative canopy ring (N) by aligning the ring's
slots with the screws in the canopy (C). Rotate the canopy
ring (N) counter-clockwise to lock in place.
A
9
Please contact 1-877-527-0313 for further assistance.
M
N
C
D
HAMPTONBAY.COM