Special Functions; Lock Function - Migatronic OMEGA2 CoWelder 300 Guía De Usuario

Connection and start-up
Switch on, press, weld
Welding program setting
• Switch on the welding machine on the main switch (2)
• Select welding program or material/gas/wire
ADVANCED II
SYNERGIC
mm
Please read how this should
be selected on your welding
machine in the quick guide.
Select the setting that fits the
required wire and shielding
gas.
• Adjust the welding current and secondary
parameters. Please read your quickguide
• The machine is now ready to weld
WARNING
When you activate the torch
trigger, there is voltage applied to
the welding wire/electrode.

Special functions

Lock function

I
5 SECS
dimension.
Software reading
• Insert the SD card into the
machine's card reader as
shown in the drawings.
• Turn on the machine.
• The display flashes shortly
with three lines
• Wait until the set current is
displayed.
• Turn off the machine and remove the SD card.
• The machine is now ready for use.
It is necessary to read software inside the new control
unit by means of a SD card, if the control unit has been
exchanged. The software can be downloaded from
www.migatronic.com
II
5 SECS
11