Removal Of The Hub Base; Cleaning And Maintenance; Maintenance Of The 5-Point Harness Buckle - APRAMO METTRO Manual Del Usuario

Please ensure that the car seat has been locked in one position and
is not located in the middle of two reclining positions.
We advise that the reclining position should be progressive with the
growth of your child. From maximum reclining for newborn, to the
least reclining position for children approx. 100 cm high
WARNING! WHEN INSTALLED FORWARD FACING, THIS CHILD
CAR SEAT MAY NOT FIT IN ALL OF APPROVED VEHICLES WHEN
USED IN ONE OF THE RECLINED POSITIONS. IF IN DOUBT,
PLEASE CONTACT THE MANUFACTURER OR THE RETAILER.
6

REMOVAL OF THE HUB BASE

To uninstall the base, follow the reverse steps to the installation of the
base (Fig. 6).
Retract the support leg by pressing the support leg adjustment
button (7) (Fig. 5).
Press the ISOFIX extension button (2) and pull the base towards you.
To release the connectors from the anchor points, press the ISOFIX
release button 9A and meanwhile pull the button 9B towards you.
Press the ISOFIX extension button (2), and retract the ISOFIX
connectors (1) into the base so that they are protected for storage or
transportation of the base.
Turn the support leg to the leg storage position (Fig. 2). The base can
now be transported (6).
7

CLEANING AND MAINTENANCE

7.1 Maintenance of the 5-point harness buckle

A buckle failure can cause injuries. DO NOT lubricate or grease any part
of the 5-point harness buckle of the child car seat. The malfunction
of the harness buckle is usually caused by an accumulation of debris
such as food crumbs or other small particles.
Some signs of a malfunction include:
GB 09 FR 09