Setting - Lepu Medical LOX100A Manual Del Usuario

Figure 5
%SpO
PR
98 2
75
1
%SpO PI%
2
98
6.5
3 Figure 7
8. Once the patients finger has been removed from the device the screen
will dispaly"Finger out"(Fig8). After a period of 8 seconds the device will
shut down automatically
9. When the battery power is low,the screen will display a low battery
symbol(Figure 9).The device will shut down automatically after 8
seconds.
Finger out
Figure 8
Figure 6
%SpO
PR
2
98
75
2
4
Figure 9
7
8． Setting
Menu Setting range
SpO Limit Lo 85%~99%
2
PR Limit Lo 30bpm~100bpm
PR Limit Hi 100bpm~200bpm
Sound Volume Level 1~5 and Off can be selected
Exit Long press to exit
During a non-measurement condition"Finger out", by pressing and
holding the power button the user can enter the menu settings as shown
below.

Setting

SpO2 Limit Lo
90
PR Limit Lo
50
PR Limit Hi
Figure 10
120
Figure 10
Once in the menu setting as shown in Fig 10, short presses of the power
button will advance through the menu options.Long presses will allow
the user to adjust the parameters in that setting.
To exit the menu setting, select"Exit"press and hold the power button.
The device will automatically exit the menu settings after 30 seconds in
the absence of user activity.
During measurement, if the SpO2 or PR values exceed their setting limit,
the device will periodically beep and the numerical value will flash to alert
the user.
Pressing and holding the power button will disable the alert for
approximately 100 seconds before the alert is reinstated.
Default setting
90%
50bpm
120bpm
Setting
Sound
3
Exit
Figure 11
8