EN
Important Tips
When using for the first time, follow RoboVac to observe and resolve any problems that may occur.
a
a
d
d
Remove power cords and small objects from the floor that may entangle RoboVac.
Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very
dark-colored high-pile rugs or rugs thicker than 1.02 in/26 mm as they may cause RoboVac to
malfunction.
Keep RoboVac away from spaces lower than 4.17 in/106 mm to prevent RoboVac from
getting stuck. If necessary, place a physical barrier to block off the problem areas.
Keep RoboVac away from wet areas during cleaning.
RoboVac may climb on top of objects less than 0.67 in/17 mm in height (the height will be
reduced if the mopping module is installed). Remove these objects if possible.
Anti-drop sensors will prevent RoboVac from tumbling down stairs and steep drops in most
cases. Sensors are less effective if dirty or used on carpeted/reflective/very dark-colored
floors. It is recommended to place physical barriers to block off areas where RoboVac may fall.
Place physical barriers in front of fireplaces and areas that may cause damage to RoboVac if
entered.
04
b
b
c
c
e
e
f
f
Verwendung Ihres RoboVac
DE
– Wenn Sie die Objekte nicht entfernen können,
prüfen Sie, ob RoboVac normal zur Ladestation
zurückkehren kann; wenn nicht, wenden Sie
sich an den eufy-Kundendienst, um Hilfe zu
erhalten.
– Lassen Sie die Ladestation immer
eingesteckt, andernfalls kann der
RoboVac nicht automatisch zu ihr
zurückkehren.
– Wenn die Ladestation am Netzstrom
angeschlossen ist, verlischt die LED an
der Ladestation.
05