How To Operate Your Ceiling Fan - Fanimation FP9044 Serie Manual Del Usuario

How to Assemble Your Switch Cup Assembly (Continued)
2. Securely attach the 9-pin switch cup connector to
the wiring harness socket within the adapter
assembly. (Figure 2)
WARNING
The color label on these two connectors must
correspond to each other.
3. Assemble the switch cup assembly onto the
housing adapter with previously removed screws.
(Figure 3)
1. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 1)
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan until the blades are in place. Noise and fan damage
could result.
2. Install the fan fob and pull chain coupler. (Figure 2)
HARDWARE USED:
Fan Fob
Pull Chain Coupler
3. Check the operation of the fan by gently pulling on
the fan fob. (Figure 3)
Fan Pull Chain Operating Sequence
st
1 Pull
nd
2 Pull
rd
3 Pull
th
4 Pull

How to Operate Your Ceiling Fan

X 1
X 1
High
Medium
Low
Off
Switch Cup
Assembly
15
Figure 2
Figure 3
Main Fuse Box
Figure 1
Fan Fob
Pull Chain
Coupler
Figure 2
Figure 3