Door Alarm - Dacor DYF42SBI Serie Manual Del Usuario

Power Cool
03 Energy Saver / Override E-smart (3 sec)
Energy Saver
Override
E-smart

04 Door Alarm

Door Alarm
TBI_Dacor_UserManual_DA68-03581A-04_EN.indd 23
The Power Cool function lowers the fridge temperature and speeds
up the cooling process. In the Power Cool mode, the fridge runs at full
power for several hours and then returns to normal operation and the
previous temperature setting. Use Power Cool to rapidly cool food
that spoils quickly or to rapidly cool the refrigerator after the door has
been left open for some time.
To start Power Cool, press and hold Fridge for 3 seconds. The Power
Cool icon lights and the refrigerator speeds up the cooling process.
To deactivate, press and hold Fridge for 3 seconds again. Power Cool
turns off and the refrigerator returns to the previous temperature
setting.
NOTE
Using Power Cool increases power consumption. If you do not need
the Power Cool function on, make sure you turn it off so that the
refrigerator can return to normal operation and the previous set
temperature.
Use Energy Saver mode to reduce power consumption. Press Energy
Saver to turn on or off Energy Saver mode and the corresponding
indicator. By default, Energy Saver mode is enabled.
The Override E-smart function activates/deactivates Smart Grid.
Press Energy Saver for 3 seconds to set/clear the Override E-smart
function.
You can enable or disable the door alarm by pressing Door Alarm.
When Door Alarm is enabled and a door is left open for more than 2
minutes, the alarm will sound and the alarm indicator will blink. The
Door Alarm function is enabled by factory default.
English 23
2020-12-11 5:12:44