English - Corsair HYDRO X Serie Manual De Instrucciones

IMPORTANT NOTICE
Quick Start Guide is a general installation guide and does not cover the specifics of individual case or
radiator mounting.
CORSAIR recommends you thoroughly leak-test your custom cooling system for at least 24 hours to
ensure that the system is securely sealed and operating reliably. CORSAIR warranty does not cover any
hardware damage resulting from poorly executed, improper and otherwise hasty assembly of your custom
water-cooling system.
Disassembly of CORSAIR HYDRO X products is highly discouraged due to complex design of components.
Such action may result in irreparable mechanical, electrical or chemical damage that may void the warranty.
For an exact and up-to-date product compatibility list, please refer to CORSAIR website.
PACKAGE CONTENTS
A B
E
A — x1 XD7 RGB DISTRO PLATE / PUMP UNIT
B — x1 ATX 24-PIN PSU JUMPER BRIDGE
C — x4 CORSAIR G1/4" PLUGS
D — x1 CORSAIR G1/4" TEMPERATURE
SENSOR PLUG
C D
F G
E — x12 M4 x 8mm SCREW
F — x1 PLUG TOOL
G — x1 ARGB MOTHERBOARD ADAPTER CABLE
1
PREREQUISITES (NOT INCLUDED)
H
I
K
H — CORSAIR iCUE COMMANDER PRO SMART RGB LIGHTING AND FAN SPEED CONTROLLER
I — PHILLIPS-HEAD SCREWDRIVER
J — FILLING FLASK & CORSAIR XL TYPE COOLANT
K — CORSAIR XF ROTARY Y-SPLITTER
Note: CORSAIR iCUE Commander PRO or CORSAIR Lighting Node PRO are required for driving and controlling
the RGB LED illumination. CORSAIR iCUE Commander PRO is required for automatic control of the pump and
for monitoring the liquid temperature using iCUE software suite.
J
2

ENGLISH